{"id":6800,"date":"2024-10-02T01:03:59","date_gmt":"2024-10-01T16:03:59","guid":{"rendered":"https:\/\/www.dry-fog.com\/en\/?post_type=technical-report&p=6800"},"modified":"2025-01-16T05:45:41","modified_gmt":"2025-01-15T20:45:41","slug":"nozzle-main-001","status":"publish","type":"technical-report","link":"https:\/\/www.dry-fog.com\/en\/projects-technology\/technical-report\/nozzle-main-001\/","title":{"rendered":"Spray Nozzle Maintenance for Dry Fog Humidifier AKIMist\u00aeE"},"content":{"rendered":"
\n
\n
\n
\n

Intro<\/h3>\n<\/div>\n

Even the most luxurious items require a little TLC so it\u2019s no surprise that our high-quality spray nozzles require the occasional maintenance. Proper care for your spray nozzle will optimize performance capabilities and lifespan. Who knew a little cleaning could save you so much time and money?<\/span><\/p>\n

\n
\n
\n
\n

8 Steps to a Clean Spray Nozzle<\/h3>\n<\/div>\n

We\u2019ve broken down the cleaning process into 8 simple steps.<\/span><\/p>\n

1. Gather Materials:<\/h3>\n

You will need warm water, a small bowl\/container, mild dish soap or a suitable cleaning solution, a soft brush\/toothbrush, and a clean cloth. It\u2019s crucial to use a non-corrosion cleaning agent.<\/span><\/p>\n

2. Remove The Nozzle:<\/h3>\n

If possible, detach the spray nozzle from the bottle\/sprayer; this allows for easier, and more thorough cleaning.<\/span><\/p>\n

3. Rinse With Warm Water:<\/h3>\n

To loosen any clogs or build-up, hold the nozzle under warm running water.<\/span><\/p>\n

4. Soak In Cleaning Solution:<\/h3>\n

Grab your bowl\/small container with the mixture of warm water and mild dish soap (or suitable cleaning solution). To get rid of stubborn residue, let the nozzle soak in the solution for 10-15 minutes.<\/span><\/p>\n

5. Scrub The Nozzle:<\/h3>\n

Once the 10\u201315-minute soak is up, take the soft brush\/toothbrush and gently scrub the nozzle. It\u2019s important to note that excessive force or using a material that isn\u2019t soft can damage the nozzle. Also, make sure to get all the openings and crevices for a thorough clean.<\/span><\/p>\n

6. Rinse:<\/h3>\n

Bring the nozzle under warm running water once again and remove the cleaning solution and debris.<\/span><\/p>\n

7. Dry:<\/h3>\n

Use a clean cloth to pat dry or air dry before reattaching the nozzle. Make sure that it is completely dry before reassembling.<\/span><\/p>\n

8. Test:<\/h3>\n

Now you can test the reassembled nozzle and test if the spray is coming out as it should and there are no residual blockages.<\/span>\n<\/ol>\n

\n
\n
\n
\n

Follow-up Testing<\/h3>\n<\/div>\n

Here are some things to look out for when testing:<\/span><\/p>\n