Ball Joints for Connecting Spray Nozzles UT (Metal)
Ball joints for connecting standard spray nozzles, enabling the…
Ball Joints for Connecting Spray Nozzles
UT
Ball joints for connecting standard spray nozzles, enabling the spray direction adjustment within a range of 50 degrees.
Specs
| Liquid Inlet Thread Size | R1/8, R1/4, R3/8 |
|---|---|
| Outlet Thread Size | R1/8, R1/4, R3/8 |
| Main Material | FRPP |
| Max. Operating Pressure | 1 MPa *1 |
| Max. Temperature | 80℃ |
Materials: Click here for full material descriptions, including chemical and heat resistance.
*1) Use UT-FRPP only at pressures below 1 MPa (at room temperature).
* Do not use under conditions where water hammer or sudden change of water pressure occurs.
* For use with KB series nozzles, a different type of UT Ball Joints are required. Inquire with us for details.
Resources for Download
• Allows adjustment of spray direction over a range of 50 degrees as desired.
• Lightweight, high seal performance. Spray direction is adjustable while spraying (up to 0.3 MPa).
Applications
- Accurate nozzle alignment is possible after connected to a pipe.
- Where large changes in spray direction are required depending on nozzle application such as cleaning and air blowing.
Structure
- Adaptor and cap: glass-fiber reinforced polypropylene (FRPP)
- Ball: glass-fiber reinforced polypropylene (FRPP) + polypropylene (PP) + EPDM resin
