Ball Joints for Connecting Spray Nozzles UT
Ball joints for connecting standard spray nozzles, enabling the…
Ball Joints for Connecting Spray Nozzles
UT (Metal)
Ball joints for connecting standard spray nozzles, enabling the spray direction adjustment within a range of 50 degrees.
Specs
| Liquid Inlet Thread Size | R1/8–R1/2, Rc1/8–Rc3/4 |
|---|---|
| Main Material | S303, B |
| Max. Operating Pressure | 15 MPa *1 |
| Max. Temperature | 120℃ *2 |
Materials: Click here for full material descriptions, including chemical and heat resistance.
*1) Use UT-S303 (stainless steel 303) at pressure under 15 MPa, UT-B (brass) under 4 MPa.
*2) The heat resistance temperature is the value for material S303.
* Do not use under conditions where water hammer or sudden change of water pressure occurs.
* For use with KB series nozzles, a different type of UT Ball Joints are required. Inquire with us for details.
Resources for Download
• Allows adjustment of spray direction over a range of 50 degrees as desired.
• Withstands pressure design. Available from 1/8" to 3/4" in pipe connection sizes.
Applications
- Accurate nozzle alignment is possible after connected to a pipe.
- Where large changes in spray direction are required depending on nozzle application such as cleaning and air blowing.
Structure
- Stainless steel 303 (S303) or Brass (B)
- UT-B (brass) type is available in limited sizes.
- Optional material: Stainless steel 316 or others
