Fine Fog, Hollow Cone Spray Nozzles CBIMK
A compact and low-flow-rate version of the fine fog hollow cone…
- Compact
- Spray Control
- Suction
- Applying
- Industrial Cooling
- Moisture Condioning
- Spraying
Fine Fog, Hollow Cone Spray Nozzles (Suction Type)
CBIMK-S
A compact and low-flow-rate version of the fine fog hollow cone spray nozzle BIMK-S Series.
These nozzles are of the suction type, without needing pressurizing equipment for the liquid. Additionally, they can be mounted onto different adaptors depending on the intended purpose of use. (The picture shows the nozzle with a T-type adaptor.)
Specs
| Main Material | S303 |
|---|---|
| Air Supply | Compressed air |
| Liquid Feeding System | Liquid siphon |
| Air-liquid Mixing System | Internal mixing inner air type |
| Spray Droplet Measuring Method | Laser Doppler Method |
| Fog Classification | Fine fog |
| Mean Droplet Diameter | 20–30 μm |
| Spray Capacity (Flow-rate) | 1.4–5.5 L/hr |
| Spray Angle | 60º *1 |
| Spray Width | 120 mm *2 |
- Materials: Click here for full material descriptions, including chemical and heat resistance.
- Fog Classification: Based on spray droplet size. Click here for details.
*1) Spray angle measured at compressed air pressure of 0.3 MPa and liquid siphon height of 100 mm.
*2) Measure at spray distance of 100 mm from nozzle and liquid siphon height of 100 mm.
Note: Please refer to the catalog for detailed specifications including spray capacity (flow rate), mean droplet diameter, liquid and air inlet sizes.
Resources for Download
• Compact version of BIM series producing fine atomization. Space-saving design.
• Able to provide the lowest spray flow rate among all of our pneumatic spray nozzles.
• Clog-resistant design with a low parts count.
• CBIMK-S series are hollow cone spray pneumatic nozzles producing fine atomization with a mean droplet diameter of 30 μm or less (*3).
• Liquid siphon feed type (liquid pressure device is not required).
• Spray angle of 60ﾟ.
Applications
- Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
- Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
- Moisture control: Paper, gas, ceramics, concrete, etc.
Industries where this nozzle is used
- Steelmaking
- Electronics
- Paper & pulp
- Printing
- Food
- Automotives
Structure
- Four-part structure: Nozzle tip, core, cap, and adaptor. See the catalog for details of adaptors.
