Ejector Nozzles EJX
Nozzles designed for submerged solution agitation, drawing the …
- Made-to-Order
- Agitation
- Cleaning
- Etching
Ejector Nozzles (High-velocity Type)
EJX-H
Nozzles designed for submerged solution agitation, drawing the surrounding liquid into the nozzle and ejecting it together with the supplied liquid through the nozzle orifice.
A high-velocity type with a flow velocity approximately 1.5 times higher than that of the EJX.
Specs
| Liquid Inlet Thread Size | R1/4, R1/2, R3/4 |
|---|---|
| Main Material | PP |
| Standard Pressure | 0.1 MPa |
| Supply Flow Rate at Standard Pressure | 5.80–64.0 L/min |
| Discharge Flow Rate at Standard Pressure | 18.8–206 L/min |
Materials: Click here for full material descriptions, including chemical and heat resistance.
Resources for Download
• High flow rate EJX series, featuring 1.5-2 times higher spray impact (flow velocity) compared to the conventional EJX series.
• Taking in surrounding liquid, EJX series solution agitation nozzle spouts out 3-4 times more volume than the amount supplied.
• Simple structure and compact design suitable for multiple-nozzle arrangement.
Applications
- Solution agitation, preventing deposition, uniformizing concentration and pH
- Cleaning in liquids
- Submerged etching
- Plating
Industries where this nozzle is used
- Electronics
- Automotives
Structure
- One-piece structure.