Ball Joints for Connecting Spray Nozzles UT
Ball joints for connecting standard spray nozzles, enabling the…
Universal Joints for Connecting Spray Nozzles
WUT
Universal joints for connecting standard spray nozzles, enabling the spray direction adjustment for a 360-degree direction.
Note: The WUT adaptor does not include a spray nozzle. The photos show WUT with a spray nozzle.
Specs
| Liquid Inlet Thread Size | R1/4 |
|---|---|
| Outlet Thread Size | R1/4 |
| Main Material | SCS13 |
| Max. Operating Pressure | 3 MPa |
| Max. Temperature | 90℃ |
Materials: Click here for full material descriptions, including chemical and heat resistance.
* The bolt may loosen because of vibration if it is screwed in by hand. Tighten with a torque-wrench at 6 N m.
* Maximum working pressure is 3 MPa.
* When used with a solid stream jet nozzle, slightly turbulent flow occurs. Contact us for details.
Resources for Download
• 360ﾟ rotatable to adjust spray direction.
• Includes the rotating lock to keep the nozzle direction fixed.
• Stabilizing function suppresses internal turbulent flow.
• Safe design prevents parts from dropping off when the lock is released.
Applications
- Where the adjustments of spray directions are required after piping installation.
- Where large changes in spray direction are required depending on nozzle application.
Structure
- Adaptor: Die-cast stainless steel equivalent to S304 (SCS13)
- Bolt: S303
- E-ring: S304
- O-ring: NBR
- (In our material code, S304 represents stainless steel 304 and S303 represents stainless steel 303.)
