3D Rotational Tank Cleaning Nozzles JA3 (JET ATTACKER)
JET ATTACKER Series: tank cleaning nozzles with three-dimension…
- JET ATTACKER
- Cleaning
2D Rotational Tank Cleaning Nozzles
JA2 (JET ATTACKER)
JET ATTACKER Series: conveyor cleaning nozzles with two-dimensional rotation, capable of cleaning lower surfaces.
They rotate solely by the force of the cleaning liquid, eliminating the need for external power.
Specs
| Liquid Inlet Thread Size | Rc1/2 |
|---|---|
| Weight | JA2-2: 1.9 kg, JA2-4: 2.0 kg |
| Main Material | S304, S303, PTFE, FKM, S440C |
| Max. Temperature | 60℃ |
| Number of Nozzles Attached | 2 or 4 |
| Operating Pressure for Liquid | 0.3–2.0 MPa |
| Spray Capacity (Flow-rate) | 14–253.0 L/min *1 |
Materials: Click here for full material descriptions, including chemical and heat resistance.
*1) JA2-2: 14–136.8 L/min, JA2-4: 28–253.0 L/min
Spray flow rate in the above operating pressure range is for reference only. See the flow-rate diagram and chart for more details.
Nozzle mounting direction to tank:
The JA2 Series can be installed in any direction, 360 degrees.
The data in this catalog are the values from top of the tank installations.
Resources for Download
• The solid stream jet provides excellent cleaning performance. To achieve a wider spray coverage, a flat spray nozzle can be installed.
• No external power is needed as rotation is driven solely by the flow of the cleaning liquid.
• A variety of arm configurations are available as special order to fit specific cleaning needs, i.e. spot cleaning or full coverage cleaning.
• The JA2-2 series is equipped with two nozzles, and the JA2-4 series with four nozzles.
• Arm length can be tailored to your needs, in addition to the standard length of 200 or 300 mm.
Applications
- For cleaning hard-to-remove dirt:
- Removing tough, sticky and stubborn dirt
- Cleaning of conveyor belts
Industries where this nozzle is used
- Chemical
- Paper & Pulp
- Printing
- Food & beverages
- Medical
