Fine Fog, Flat Spray Nozzles (Suction Type) BIMV-S
Pneumatic flat spray nozzles with a wide adjustable range of fl…
- Spray Control
- Applying
- Cleaning
- Dust Suppression
- Industrial Cooling
- Moisture Condioning
- Spraying
Spray Gun Unit with BIM Nozzles
BIMV
Pneumatic flat spray nozzles with a wide adjustable range of flow rates, producing a fine fog with a mean droplet diameter of 100 μm or less.
These nozzles can be mounted onto different adaptors depending on the intended purpose of use. (The picture shows the nozzle with an SNB-type adaptor.)
For adaptor features and selection tips, see our BIM Series Adaptor Selection Guide.
Specs
| Main Material | S303 |
|---|---|
| Air Supply | Compressed air |
| Liquid Feeding System | Liquid pressure |
| Air-liquid Mixing System | Internal mixing inner air type |
| Spray Droplet Measuring Method | Laser Doppler Method |
| Fog Classification | Fine fog |
| Mean Droplet Diameter | 20–100 μm |
| Spray Capacity (Flow-rate) | 1.0–107 L/hr |
| Spray Angle | 45º, 80º, 110º *1 |
| Spray Width | 80–490mm *2 |
- Materials: Click here for full material descriptions, including chemical and heat resistance.
- Fog Classification: Based on spray droplet size. Click here for details.
*1) Spray angle measured at compressed air pressure of 0.3 MPa and liquid pressure of 0.1 MPa.
*2) Measured at spray distance of 100 mm from nozzle.
Note: Please refer to the catalog for detailed specifications including spray capacity (flow rate), mean droplet diameter, liquid and air inlet sizes.
Resources for Download
• Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3).
• Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa.
• Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio).
• Spray angle of 110ﾟ, 80ﾟ, or 45ﾟ.
*3) Measured by Laser Doppler Method.
Applications
- Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, insecticide, aqueous urea, etc.
- Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
- Moisture control: Paper, gas, ceramics, concrete, etc.
- Cleaning: Printed circuit boards, glass tubes, etc.
- Others: Dust suppression, catalyst denitration, etc.
- [Steelmaking industry]
- Raw material process: Dust suppression at the conveyor line, Flue gas denitration reducing agent
- Steelmaking process: Cooling refractories at maintenance of ladle and tundish, Cooling electric furnace and electrode
- Rolling mill process: Cooling coil
- Surface finish process: Minimized spangle treatment at the continuous galvazing line, Cooling coating line
Industries where this nozzle is used
- Steelmaking
- Pollution control
- Electronics
- Paper & pulp
- Printing
- Automotives
Structure
- Four-part structure: Nozzle tip, core, cap, and adaptor. See the catalog for details of adaptors.
